Features
- Construction: Balsa and ply with prehinged ailerons and rudder and airfoiled control surfaces, motor box preinstalled with blind nuts providing perfect spacing for spinner backplate-no need for measuring, cowl ring also preinstalled
- Wings: Two piece with carbon fiber wing joiner, secures to fuselage with wing hooks and rubber bands inside fuselage
- Motor Mount: Built-up plywood
- Covering: Top Flite MonoKote
- Aileron Control: Dual servo
- Cowl: Prepainted fiberglass, attaches with rare earth magnets
- Canopy: Clear, single
- Wheel Pants: Prepainted ABS
- Landing Gear: Prepainted aluminum 0.079" (2mm) thick
- Wheels: Two foam 1.75" (44mm) diameter
- Spinner: White plastic, 1.75" (44mm) diameter
- Hardware: Full set included
- Building Time: Approximately 4-6 hours
Specifications
- Wingspan: 41" (1040mm)
- Wing Area: 343 sq in (22.1 sq dm)
- Weight: 27.5 - 31 oz (780 - 880g)
- Airfoil: Fully symmetrical, mid wing placement
- Wing Loading: 11.5 - 13 oz/sq ft (35 - 40 g/sq dm)
- Length: 38" (965mm)
- Center of Gravity: 2-5/8" (67mm) back from the leading edge of the wing at the fuselage side
- Requires: 4-5 channel radio w/4 micro servos, 1250kV out-runner brushless motor, 35A brushless ESC (min.) and 11.1V 1500mAh LiPo battery.
Requires
- Radio: 4 channel computer radio recommended
- Servos: 4-micro Dual
- Servo Extension: For aileron servos 6" (150mm)
- Slim Extension Wire: Two 12" (305mm)
- Two Motor: Rimfire 35-30-1250 outrunner 35A ESC for Brushless Motors
- Battery: LiPo 1250 - 1500mAh 11.1V Cell Balancer: For LiPo battery,
- Battery Charger: LiPo compatible Propeller: 10x7E
|
