You have no items in your shopping cart.
Product Description
Airtronics SD-6G Transmitter
6-Channel 2.4GHz FHSS-1 Aircraft Radio System
Fly the SD-6G 2.4G FHSS-1 Digital Proportional radio control system and you'll have a radio ready for just about every 6-channel aircraft and helicopter available today. From micro-electric aircraft to scale-aerobatic aircraft, from mini fixed-pitched helicopters to advanced CCPM 3D electric helicopters, the SD-6G can handle it,- and do it glitch-free!
*The SD-6G features a Trainer System that is compatible with all Airtronics SD series transmitters.
General System Features:
• 6-Channel 2.4G FHSS-1 Digital Proportional Computer Radio Control System for Aircraft and Helicopters • Includes Full-Range RX600 (92224) 6-Channel 2.4G FHSS-1 Receiver • Uses 6 "AA" Batteries (Included) for Lighter Weight and Better Feel • 10-Model Memory • Direct Model Select (Models 1-3) • Easy-to-Read Multi-Function LCD with Digital Voltage Display • User-Selectable Model Type Templates | • Digital Trims • Trainer System Compatible with all SD Series Transmitters• Model Naming • Model Select • Audible Low-Voltage Alarm • Low-Power Range-Check Mode • Programmable Fail Safe • User-Selectable Flight Modes • Stop Watch and Count-Up Timers • Data Copy and Data Reset |
Aircraft-Specific Programming Features: • Servo Monitor • 3 Flight Modes (FN/F1/F2) • Aileron, Elevator, and Rudder Dual Rate • Aileron, Elevator, and Rudder Exponential • Servo Reversing • Servo Centering Sub-Trim • End-Point Adjustment • Throttle Cut • 5-Point Programmable Throttle Curve • Aileron Differential • Flaperon Mixing • Flap-to-Elevator Mixing • Dual Elevator Mixing with End-Point Adjustment • Ailvator Mixing • V-Tail Mixing with End-Point Adjustment • Delta (Elevon) Mixing with End-Point Adjustment • 2 Programmable Compensation Mixers • Common or Flight Mode-Specific Trim with Throttle-Trim Lock | Helicopter-Specific Programming Features: • Servo Monitor • 3 Flight Modes (FN/F1/F2) • 9 Pre-programmed Swashplate Templates • Aileron, Elevator, and Rudder Dual Rate • Aileron, Elevator, and Rudder Exponential • Servo Reversing • Servo Centering Sub-Trim • Advanced Swashplate Adjustment • CCPM End-Point Adjustment • End-Point Adjustment • Throttle Cut • 5-Point Programmable Throttle Curve • Throttle Hold • 5-Point Programmable Pitch Curve • Revolution Mixing • 2 Remote Gyro Gains • 2 Programmable Compensation Mixers • Common or Flight Mode-Specific Trim with Throttle-Trim Lock |
Transmitter Specifications: • Output Power: 100mW • Operating Voltage: 6.7-9.6v • Current Drain: 130-200mA • Temperature Range: 32-122ºF (0-50ºC) • Pulse Width: 0.9-2.1msec • Weight with Batteries: 26.45oz (750gr) • Frequency/Modulation Type: 2.4GHz/FHSS-1 | RX600 (92224) Receiver Specifications: • Frequency/Modulation Type: 2.4GHz/FHSS-1 • Nominal Input Voltage: 4.8-6.6v • Weight: 0.27oz (7.8gr) with Case • Weight: 0.20oz (5.9gr) without Case • Dimensions: 1.64 x 0.85 x 0.47in (41.7 x 21.5 x 12.0mm) • Fail Safe Support: Yes (Ch 1-4) • Connector Type: Universal 'Z' |
What's In The Box: • SD-6G 6-Channel 2.4GHz FHSS-1 Transmitter • RX600 (92224) 6-Channel 2.4GHz FHSS-1 Receiver • 6 'AA' Rechargeable Batteries for Transmitter • AC Dual Output Charger • On/Off Switch • User's Guide |
Items Required, But Not Included:
Receiver Battery: The receiver's Nominal Input Voltage is 4.8v ~ 6.6v, therefore, the receiver can be powered using a 4 Cell or 5 Cell Ni-Cd or Ni-MH battery pack or a 2S Li-Fe/A123 Battery Pack. DO NOT USE A 2S Li-Po!
Servos: No servos are included. Analog or Digital servos can be used. We recommend using Airtronics servos that are within the specification range required for your model.
You may also be interested in the following product(s)
|
|
|
|
|
|
|
|
|
|
|
|
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
